Spinner Flame Effect Guide

Quickstart

Please follow the 4 steps below to help you set up your appliance quickly and correctly.

1. Remove the orange plastic pebble bed and place the metal spinner centrally onto the spinner pin.

2. Ensure that the metal spinner rotates without any obstruction. If obstruction occurs, gently bend the metal arm mounting the spinner pin until it rotates freely.

3. Re-position the orange plastic pebble bed after first removing the sticker from the top of it. Place the white pebbles over it. Place the larger pebbles at the base of the pebble bed and build upwards.

4. Connect the unit to a mains power outlet and switch on. Check the table above for the correct switching sequences.